enltru

pwermax-125

  • Overview

    Delivering maximum power and performance for air plasma, the Powermax125® plasma system cuts thick metals fast. Able to make short work of the toughest cutting and gouging jobs, the system offers a 100% duty cycle, a 25 mm (1″) mechanized pierce capability, and fast gouging metal removal. It also gives you the latest technological innovations, such as Smart Sense™ technology to automatically adjust the gas pressure. Eleven Duramax™ Hyamp torch styles provide versatility for hand cutting, portable automation, X-Y table cutting, extended reach cutting, and robotic cutting and gouging.

    Applications

    • Bevel cutting
    • Gouging
    • Flush cutting
    • Fine feature cutting
    • Extended reach cutting

    Operating data

    Capacity Thickness Cut speed
    Cutting
    Recommended 38 mm (1-1/2”) 457 mm/min (18 ipm)
    44 mm (1-3/4”) 250 mm/min (10 ipm)
    Severance (hand cutting) 57 mm (2-1/4”) 125 mm/min (5 ipm)
    Pierce * 25 mm (1”)

    Pierce rating for handheld use or with automatic torch height control

    Capacity Metal removal rate Groove profile
    Gouging
    Typical gouge 12,52 kg/hr
    (27.6 lbs/hr)
    4,3 mm – 7,9 mm D x 6,1 mm – 9,9 mm W
    (0.17-0.31” D x 0.24-0.39” W)
  • Lower operating costs

    • Consumable life up to four times longer than other systems in this amperage range
    • Electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused

    Built to handle tough jobs

    • Hypertherm Certified™ reliability ensures peak performance even in the harshest environments
    • Duramax™ Hyamp torches are designed for high-impact and heat resistance

    cht_pmx125_cut_performance_chart

  • Specifications

    Input voltages CSA 480/600 V, 3-PH, 50/60 Hz
    CE 400 V, 3-PH, 50/60 Hz
    CCC 380 V, 3-PH, 50/60 Hz
    Input current @ 21.9 kW 300/400/480/600 V, 38/36/31/24 A
    Output current 30 – 125 A
    Rated output voltage 175 VDC
    Duty cycle @ 40°C (104°F) 100% @ 125 A
    Open circuit voltage (OCV)
    • 400/600 CSA: 320 VDC
    • 380 V CCC: 290 VDC
    • 400 V CE: 305 VDC
    Dimensions with handles 592 mm D; 274 mm W; 508 mm H (23.3″ D; 10.8″ W; 20.0″ H)
    Weight with 7.6 m (25′) torch
    • 480 V, 47,9 kg (105.7 lbs)
    • 600 V, 47,5 kg (104.7 lbs)
    • 380 V, 45,2 kg (99.6 lbs)
    • 400 V, 48,9 kg (107.8 lbs)
    Gas Supply Clean, dry, oil-free air or nitrogen
    Recommended gas inlet
    flow rate / pressure
    Cutting: 260 l/min (550 scfh) @5.9 bar (85 psi)
    Gouging: 212 l/min (450 scfh) @4.1 bar (60 psi)
    Input power cable length 3 m (10′) *
    Power supply type Inverter – IGBT
    Engine drive requirement 40 kW for full 125 A output
    Certifications CSA-certified for use in the Americas and Asia, except China.
    CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
    CCC for use in China.
    Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.